The watchwinder:
In every good watchmaker workshop you will find at least one »watchwinder«
This machine (product range) is needed to check if a repaired or reinstalled automatic watch is working correctly.
Additionally the watch will be controlled under realistic conditions (for example due to the changing position of the watch the exactness will be checked). Watchwinders from our (workshop) are very usefull for watch collectors:
Full wound up, automatic watches will achieve high exactness.
Due to the permanent movement of the watchwinder, standstill is avoided and therefore complicated watchadjustment will no longer be necessary (for example calendar, lunar phase etc.).
Damage through inappropriate watchadjustment will thus also be avoided.
    technical data:
  • Two-level-movement set up a winding reserve - even unilateral drawn up watches.
  • All axles run in ball bearings.
  • The totally enclosed miniatur ball bearings, made of high-grade steel, are lubricated on life time.
  • The Heads are equiped with a synchronous geared motor
    which runs on 12 V alternating current.
  • Synchronous motor and ball bearings also guarantee continuous operation along with a noiseless and even run.
  • The asterisk with up to 6 nitro-arms turns around once the focal point in 1 minute.
  • These arms again turn four times per minute around the own axle.
  • Polymer retaining springs allow easy mounting and unmounting.
  • Any commercially available timer will make movement intervals optionally variable.
  • Space required for a watchwinder is about 25 x 25 x 20cm (w/h/d)
  • We guarantee 24 months faultless working.